ASTM-C744 2010
$35.75
C744-10 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 3 |
1.1 This specification covers prefaced concrete and calcium silicate masonry units with the exposed-to-view-in-place surfaces covered at the point of manufacture with resin, resin and inert filler, or cement and inert filler to produce a smooth resinous tile facing. This specification does not address, and therefore is not applicable to, ground-face concrete masonry units that are manufactured by grinding a thin layer off the surface of a concrete masonry unit to expose aggregates within and polishing to produce a smooth, architectural finish.
1.2 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Materials Facing Requirements |
| 2 | Dimensional Tolerances Sampling and Testing TABLE 1 |
| 3 | Inspection Compliance Keywords |
Related products
-
ASTM-C749 2015(Redline)
C749-15 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite (Redline) Published By Publication…
-
ASTM-C744 2014
C744-14 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units Published By Publication Date…
-
ASTM-C794 2015
C794-15a Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants Published By Publication Date Number…
-
ASTM-C764 2019
C764-19 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation Published By Publication Date Number of…
-
ASTM-C794 2018(Redline)
C794-18 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants (Redline) Published By Publication Date…
-
ASTM-C744 2016
C744-16 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units Published By Publication Date…
-
ASTM-C474 2012(Redline)
C474-12 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction (Redline) Published By…
-
ASTM-C749 2010
C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite Published By Publication Date…
-
ASTM-A744 2010
A744/A744M-10 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service Published By Publication Date…
-
ASTM-C774 2000
C774-88(2000) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing Published…
-
ASTM-C794 2010
C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants Published By Publication Date Number…
-
ASTM-C754 2015(Redline)
C754-15 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products…
-
ASTM-C754 2018
C754-18 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products…
-
ASTM-C747 2010
C747-93(2010)e1 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite…
-
ASTM-C754 2020(Redline)
C754-20 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products…
-
ASTM-C744 2014(Redline)
C744-14 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units (Redline) Published By Publication…
-
ASTM-C784 2020
C784-20 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets Published By Publication Date Number…
-
ASTM-C764 2017(Redline)
C764-17 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation (Redline) Published By Publication Date Number…
-
ASTM-C794 2010(Redline)
C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants (Redline) Published By Publication Date…
-
ASTM-C704 2012
C704/C704M-12 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature Published By…
-
ASTM-C748 2020(Redline)
C748-20 Standard Test Method for Rockwell Hardness of Graphite Materials (Redline) Published By Publication Date…
-
ASTM-C748 2010
C748-98(2010)e1 Standard Test Method for Rockwell Hardness of Graphite Materials Published By Publication Date Number…
-
ASTM-C844 2010
C844-04(2010) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster Published By…
-
ASTM-C744 2016(Redline)
C744-16 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units (Redline) Published By Publication…
-
ASTM-A744 2010
A744/A744M-10e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service Published By Publication Date…
-
ASTM-C724 2010
C724-91(2010) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass Published By…
-
ASTM-C764 2019(Redline)
C764-19 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation (Redline) Published By Publication Date Number…
-
ASTM-C724 2015
C724-91(2015) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass Published By…
-
ASTM-C747 2016
C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite…
-
ASTM-C704 2001
C704-01e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature Published By…
-
ASTM-C744 2011(Redline)
C744-11 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units (Redline) Published By Publication…
-
ASTM-C734 2015
C734-15 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering Published By…
-
ASTM-C749 2020
C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite Published By Publication Date…
-
ASTM-C774 2016
C774-88(2016) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing Published…
-
ASTM-C744 2011
C744-11 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units Published By Publication Date…
-
ASTM-A744 2013
A744/A744M-13 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service Published By Publication Date…
-
ASTM-C474 2013
C474-13 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction Published By Publication…
-
ASTM-A744 2013(Redline)
A744/A744M-13 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service (Redline) Published By Publication…
-
ASTM-C749 2013
C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite Published By Publication Date…
-
ASTM-C734 2019
C734-15(2019) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering Published By…
