BS EN 13950:2014
$167.15
Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods
| Published By | Publication Date | Number of Pages |
| BSI | 2014 | 36 |
This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum boards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the gypsum board face exposed. The method of fixing and jointing should ensure that the insulating material is not exposed in its normal application.
This European Standard covers the following performance characteristics: reaction to fire, fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods.
It provides for the assessment and verification of constancy of performance of the products to this European Standard.
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 6 | Foreword |
| 7 | 1 Scope 2 Normative references |
| 8 | 3 Terms, definitions, symbols, abbreviations and classification 3.1 Terms and definitions of the product 3.2 General terms |
| 9 | 3.3 Symbols and abbreviations Table 1 — Symbols and abbreviations 3.4 Classification 4 Requirements 4.1 General |
| 10 | 4.2 Fire behaviour 4.2.1 Reaction to fire 4.2.2 Fire resistance 4.3 Water vapour permeability (expressed as water vapour resistance factor) 4.4 Flexural strength 4.5 Impact resistance 4.6 Direct airborne sound insulation 4.7 Acoustic absorption |
| 11 | 4.8 Thermal resistance of the panel 4.9 Dimensions and tolerances 4.10 Offset 4.11 Flatness of the composite 4.12 Adhesion/cohesion of the insulating material 4.13 Dangerous substances |
| 12 | 5 Test methods 5.1 Sampling 5.2 Dimensional measurements 5.2.1 Thickness 5.2.1.1 Principle 5.2.1.2 Apparatus 5.2.1.3 Procedure 5.2.1.4 Expression of results Figure 1 — Measurement of thickness |
| 13 | 5.3 Determination of the offset 5.3.1 Principle In the case of sandwich panels: 5.3.2 Apparatus 5.3.3 Procedure Dimensions in millimetres |
| 14 | Figure 2 — Measurement of offset 5.3.4 Expression of results 5.4 Determination of the adhesion/cohesion of the insulating material 5.4.1 Principle 5.4.2 Apparatus |
| 15 | Figure 3 — Example of adhesion test apparatus |
| 16 | 5.4.3 Procedure Figure 4 — Adhesion test – Position of the specimens 5.4.4 Expression of results 5.5 Determination of the flatness of the composite 5.5.1 Principle |
| 17 | 5.5.2 Apparatus and specimens 5.5.3 Procedure 5.5.4 Expression of results 6 Assessment and verification of constancy of performance – AVCP 6.1 General 6.2 Type testing 6.2.1 General 6.2.2 Determination of the product type |
| 18 | 6.2.3 Further type testing 6.3 Factory production control (FPC) 6.3.1 General 6.3.2 Personnel 6.3.3 Equipment 6.3.3.1 Testing 6.3.3.2 Manufacturing |
| 19 | 6.3.4 Raw materials and components 6.3.5 Product testing and evaluation 6.3.6 Traceability and marking 6.3.7 Non-complying products 6.3.8 Corrective action 6.3.9 Other test methods 7 Designation of composite panels |
| 20 | 8 Marking, labelling and packaging |
| 21 | Annex A (informative) Sampling procedure for testing A.1 General A.2 Sampling procedure A.2.1 General A.2.2 Random sampling0F ) A.2.3 Representative sampling A.2.3.1 General A.2.3.2 Sampling from a stack |
| 22 | A.2.3.3 Sampling from a consignment formed of banded or wrapped packs |
| 23 | Annex B (normative) Mounting and fixing in the test according to EN 13823 (SBI test) B.1 Mounting and fixing of the composite panels |
| 24 | Figure B.1 — Mounting of the composites and fixing them to the substrate – Distribution of the dabs Figure B.2 — Mounting of the composites and fixing them to the substrate – Section |
| 25 | Annex ZA (informative) Clauses of this European Standard addressing provisions of the EU Construction Products Regulation ZA.1 Scope and relevant characteristics Table ZA.1 — Relevant clauses for gypsum board thermal/acoustic insulation composite panels and intended use |
| 26 | ZA.2 Procedure for AVCP of gypsum board thermal/acoustic composite panels ZA.2.1 Systems of AVCP Table ZA.2 — Systems of AVCP |
| 27 | Table ZA.3.1 — Assignment of AVCP tasks for gypsum board thermal/acoustic insulation composite panels under system 1 (for reaction to fire classes A1(1), A2 (1), B (1),C (1)) |
| 28 | Table ZA.3.2 — Assignment of AVCP tasks for gypsum board thermal/acoustic insulation composite panels under system 3 (for reaction to fire classes A1(2), A2(2), B (2), C(2), D, E) Table ZA.3.3 — Assignment of AVCP tasks for gypsum board thermal/acoustic insulation composite panels under system 4 (for reaction to fire classes (A1 to E) (3), F) ZA.2.2 Declaration of performance (DoP) ZA.2.2.1 General |
| 29 | ZA.2.2.2 Content |
| 30 | ZA.2.2.3 Example of DoP |
| 31 | ZA.3 CE marking and labelling |
| 32 | Figure ZA.1 — Example CE marking information of products under AVCP system 3 on the accompanying label, or on the packaging or on the accompanying commercial documents |
| 33 | Figure ZA.2 — Example CE marking information of products under AVCP system 3 on the product |
| 34 | Bibliography |
