ASTM-E965 2006
$35.75
E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
| Published By | Publication Date | Number of Pages |
| ASTM | 2006 | 4 |
p>1.1 This test method describes a procedure for determining the average depth of pavement surface macrotexture (see 3.1) (1) by careful application of a known volume of material on the surface and subsequent measurement of the total area covered. The technique is designed to provide an average depth value of only the pavement macrotexture and is considered insensitive to pavement microtexture characteristics.
1.2 The results obtained using this procedure to determine average pavement macrotexture depths do not necessarily agree or correlate directly with those obtained by other pavement macrotexture measuring methods (1-5).
1.3 The values stated in inch-pound units are to be regarded as the standard The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method Significance and Use |
| 2 | Materials and Apparatus Procedure Calculation FIG. 1 |
| 3 | Faulty Tests Report Precision and Bias REFERENCES |
Related products
-
ASTM-E960 2008
E960-93(2008) Standard Specification for Laboratory Glass Beakers Published By Publication Date Number of Pages ASTM…
-
ASTM-E695 2003
E695-03 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact…
-
ASTM-E2965 2016(Redline)
E2965-16a Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials…
-
ASTM-E96/E96M 2016
E96/E96M-16 Standard Test Methods for Water Vapor Transmission of Materials Published By Publication Date Number…
-
ASTM-A965 2006
A965/A965M-06a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-B965 2009
B965-09 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic…
-
ASTM-E985 2006(Redline)
E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings (Redline) Published By…
-
ASTM-E965 2006(Redline)
E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique (Redline) Published…
-
ASTM-E465 2000
E465-00 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration…
-
ASTM-A965 2006
A965/A965M-06 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-E967 2003
E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers Published…
-
ASTM-E985 2006
E985-00(2006) Standard Specification for Permanent Metal Railing Systems and Rails for Buildings Published By Publication…
-
ASTM-E2965 2016
E2965-16a Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials…
-
ASTM-E945 2007
E945-07 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric…
-
ASTM-E96/E96M 2016(Redline)
E96/E96M-16 Standard Test Methods for Water Vapor Transmission of Materials (Redline) Published By Publication Date…
-
ASTM-E265 2007
E265-07e1 Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32…
-
ASTM-E465 2005
E465-00(2005) Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titration…
-
ASTM-E967 2008
E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers Published…
-
ASTM-A965 2001
A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-E965 2001
E965-96(2001) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique Published By…
-
ASTM-E964 2006
E964-06e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems Published…
-
ASTM-E969 2002
E969-02 Standard Specification for Glass Volumetric (Transfer) Pipets Published By Publication Date Number of Pages…
-
ASTM-A965 2002
A965/A965M-02e1 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-E945 2002
E945-02 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric…
-
ASTM-E975 2003
E975-03 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic…
-
ASTM-E95 2006
E95-68(2006) Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation Published By Publication Date…
-
ASTM-E935 2006
E935-00(2006) Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings…
-
ASTM-E968 2008(Redline)
E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Redline) Published By Publication…
-
ASTM-E865 2003
E865-03 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels Published By Publication Date…
-
ASTM-E995 2004
E995-04 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy…
-
ASTM-E865 2008(Redline)
E865-08 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (Redline) Published By Publication…
-
ASTM-A965 2005
A965/A965M-05 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-E2965 2016(Redline)
E2965-16 Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials…
-
ASTM-E964 2002
E964-02 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems Published…
-
ASTM-E925 2002
E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does…
-
ASTM-E964 2006
E964-06 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems Published…
-
ASTM-E995 2016
E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy…
-
ASTM-E969 2007
E969-02(2007) Standard Specification for Glass Volumetric (Transfer) Pipets Published By Publication Date Number of Pages…
-
ASTM-E905 2001
E905-87(2001) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors Published By…
-
ASTM-E935 2006(Redline)
E935-00(2006) Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings…
