ASTM-E2050 2012
$35.75
E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry
| Published By | Publication Date | Number of Pages |
| ASTM | 2012 | 4 |
1.1 This test method covers the determination of total carbon in mold powders in the concentration range from 1 % to 25 %.
Note 1As used in this test method, percentage or % refers to a mass fraction of the form (wt / wt %) (g/100g).
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This test method has been evaluated in accordance with Practice E1601 and Guide E1763 . Unless otherwise noted in the precision and bias section, the lower limit in the scope of each method specifies the lowest analyte content that may be analyzed with acceptable error (defined as a nominal 5 % risk of obtaining a 50 % or larger relative difference in results on the same test sample in two laboratories).
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method |
| 2 | Significance and Use Rounding Calculated Values Interferences Apparatus Reagents and Materials Hazards Sampling and Sample Preparation Preparation of Apparatus Calibration TABLE 1 |
| 3 | Procedure Calculation Precision and Bias TABLE 2 |
| 4 | Keywords TABLE 3 |
Related products
-
ASTM-E2350 2019(Redline)
E2350-19 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems (Redline) Published By…
-
ASTM-F2050 2019(Redline)
F2050-19 Standard Consumer Safety Specification for Hand-Held Infant Carriers (Redline) Published By Publication Date Number…
-
ASTM-E2500 2012
E2500-07(2012) Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and…
-
ASTM-E2070 2018
E2070-13(2018) Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods Published…
-
ASTM-F2050 2016(Redline)
F2050-16 Standard Consumer Safety Specification for Hand-Held Infant Carriers (Redline) Published By Publication Date Number…
-
ASTM-F2050 2012
F2050-12 Standard Consumer Safety Specification for Hand-Held Infant Carriers Published By Publication Date Number of…
-
ASTM-D2050 2019(Redline)
D2050-19 Standard Terminology Relating to Subassemblies Used in the Manufacture of Textiles (Redline) Published By…
-
ASTM-E3050 2022
E3050-22 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel Published By…
-
ASTM-E2060 2022(Redline)
E2060-22 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes (Redline)…
-
ASTM-E2058 2019(Redline)
E2058-19 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)…
-
ASTM-E2050 2012(Redline)
E2050-12 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption…
-
ASTM-E2750 2022
E2750-22 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance…
-
ASTM-E2350 2019
E2350-19 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems Published By Publication…
-
ASTM-E2070 2013
E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods Published…
-
ASTM-E3050 2022(Redline)
E3050-22 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel (Redline) Published…
-
ASTM-E2080 2014
E2080-14 Standard Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders Published…
-
ASTM-E3050 2021(Redline)
E3050-21 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel (Redline) Published…
-
ASTM-F2050 2019
F2050-19 Standard Consumer Safety Specification for Hand-Held Infant Carriers Published By Publication Date Number of…
-
ASTM-E2058 2013(Redline)
E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation…
-
ASTM-E2750 2022(Redline)
E2750-22 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance…
-
ASTM-E2040 2019(Redline)
E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers (Redline) Published By Publication…
-
ASTM-E2059 2015
E2059-15e1 Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry…
-
ASTM-E2350 2013
E2350-07(2013)e1 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems Published By Publication…
-
ASTM-E2020 2022
E2020-22 Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at…
-
ASTM-E2057 2015
E2057-10(2015) Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations Published By…
-
ASTM-E2050 2017(Redline)
E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion (Redline)…
-
ASTM-E2020 2016(Redline)
E2020-16 Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at…
-
ASTM-E2250 2002
E2250-02 Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids (Withdrawn…
-
ASTM-E2050 2012
E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion Published…
-
ASTM-E2750 2017(Redline)
E2750-17 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance…
-
ASTM-E2058 2019
E2058-19 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)…
-
ASTM-F2050 2012(Redline)
F2050-12 Standard Consumer Safety Specification for Hand-Held Infant Carriers (Redline) Published By Publication Date Number…
-
ASTM-E2950 2014
E2950-14 Standard Specification for Metal Canopy Systems Published By Publication Date Number of Pages ASTM…
-
ASTM-E2090 2012
E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers…
-
ASTM-E2750 2017
E2750-17 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance…
-
ASTM-E2050 2012(Redline)
E2050-12a Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion (Redline)…
-
ASTM-E2020 2022(Redline)
E2020-22 Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at…
-
ASTM-E2050 2017
E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion Published…
-
ASTM-E2090 2012(Redline)
E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers…
-
ASTM-E2005 2010(Redline)
E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields…
