ASTM-D7197:2013 Edition
$35.75
D7197-13 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
Published By | Publication Date | Number of Pages |
ASTM | 2013 | 4 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ASTM D7197-13
Historical Standard: Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
ASTM D7197
Scope
1.1 This standard table lists the body measurements of pregnant women from misses size two to twenty-two. Although these are body measurements, they can be used in designing apparel for women in this size range when such factors as fabric type, ease of body movement, styling, and fit are taken into account.
1.2 The values stated in either SI units or in inch-pound units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.
Keywords
body measurements; garment sizes; maternity apparel
ICS Code
ICS Number Code 13.180 (Ergonomics)
DOI: 10.1520/D7197-13
Standard Title | D7197-13 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) |
---|---|
Published Code | ASTM |
Publication Date | 2013 |
Pages Count | 4 |
Related products
-
ASTM-D7192:2020 Edition(Redline)
D7192-20 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and…
-
ASTM-D7197:2006 Edition
D7197-06 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) Published…
-
ASTM-D7196:2012 Edition
D7196-12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples Published By…
-
ASTM-D7191:2005 Edition
D7191-05 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor Published…
-
ASTM-D7157:2012 Edition(Redline)
D7157-12 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils,…
-
ASTM-D2197:2002 Edition
D2197-98(2002) Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion Published By Publication…
-
ASTM-D7194:2012 Edition(Redline)
D7194-12 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) (Redline) Published By Publication Date…
-
ASTM-D7197/D7197M:2021 Edition(Redline)
D7197/D7197M-21 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) (Redline)…
-
ASTM-D7194:2005 Edition
D7194-05 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene Published By Publication Date Number of…
-
ASTM-D7191:2024 Edition
D7191-24 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor Published…
-
ASTM-D7167:2012 Edition
D7167-12 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level…
-
ASTM-D7191:2018 Edition
D7191-18 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor Published…
-
ASTM-D7192:2018 Edition(Redline)
D7192-18 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and…
-
ASTM-D7197:2013 Edition(Redline)
D7197-13 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) (Redline)…
-
ASTM-D7157:2022 Edition
D7157-22e1 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils,…
-
ASTM-D7196:2023 Edition(Redline)
D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples (Redline) Published By…
-
ASTM-D7157:2023 Edition
D7157-23 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils,…
-
ASTM-D7193:2022 Edition
D7193-17(2022) Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape Published By Publication…
-
ASTM-D7127:2013 Edition
D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces…
-
ASTM-D7177:2005 Edition
D7177-05 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes…
-
ASTM-D5197:1997 Edition
D5197-97 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active…
-
ASTM-D7147:2021 Edition(Redline)
D7147-21 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers (Redline) Published By…
-
ASTM-D7199:2012 Edition
D7199-07(2012) Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using…
-
ASTM-D6197:2017 Edition
D6197-99(2017) Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests…
-
ASTM-D7196:2023 Edition
D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples Published By Publication…
-
ASTM-D7191:2010 Edition
D7191-10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor Published…
-
ASTM-D7195:2012 Edition
D7195-06(2012) Standard Guide for Protocol for Setting Color Specifications for a Material Published By Publication…
-
ASTM-D5197:2003 Edition
D5197-03 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active…
-
ASTM-D7199:2020 Edition
D7199-20 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using…
-
ASTM-D7190:2010 Edition
D7190-10 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films Published By…
-
ASTM-D7192:2019 Edition(Redline)
D7192-19 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and…
-
ASTM-D7147:2011 Edition(Redline)
D7147-11 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers (Redline) Published By…
-
ASTM-D7147:2005 Edition
D7147-05 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers Published By Publication…
-
ASTM-D7179:2007 Edition
D7179-07 Standard Test Method for Determining Geonet Breaking Force Published By Publication Date Number of…
-
ASTM-D7194:2012 Edition
D7194-12 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) Published By Publication Date Number…
-
ASTM-D7195:2021 Edition(Redline)
D7195-21 Standard Guide for Setting Object Color Specifications (Redline) Published By Publication Date Number of…
-
ASTM-D7194:2024 Edition
D7194-19(2024) Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) Published By Publication Date Number…
-
ASTM-D7177:2010 Edition
D7177-05(2010) Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes…
-
ASTM-D7197/D7197M:2021 Edition
D7197/D7197M-21 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) Published…
-
ASTM-D7199:2007 Edition
D7199-07 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using…