ASTM-B265 2013(Redline)

$26.65

B265-13 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate (Redline)

Published By	Publication Date	Number of Pages
ASTM	2013	10

Guaranteed Safe Checkout

Categories: 77.150.50 - Titanium products, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

Abstract

This specification covers annealed titanium and titanium alloy strip, sheet, and plate. The grades of titanium and titanium alloy metal covered by this specification shall have the chemical composition requirements of: nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium. For sheet and strip, the bend test specimen shall stand being bent cold through without fracture in the outside of the bent portion. Product analysis tolerances cover variations between laboratories in the measurement of chemical content of the specimen. In cutting samples for analysis, the operation should be carried out insofar as possible in a dust-free atmosphere because utmost care must be used in sampling titanium for chemical analysis due to its great affinity for elements such as oxygen, nitrogen, and hydrogen. The chemical analysis shall be conducted by the standard techniques normally utilized by the manufacturer and purchaser.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification ² covers annealed titanium and titanium alloy strip, sheet, and plate as follows:

1.1.1 Grade 1— Unalloyed titanium,

1.1.2 Grade 2— Unalloyed titanium,

1.1.2.1 Grade 2H— Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),

1.1.3 Grade 3— Unalloyed titanium,

1.1.4 Grade 4— Unalloyed titanium,

1.1.5 Grade 5— Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.6 Grade 6— Titanium alloy (5 % aluminum, 2.5 % tin),

1.1.7 Grade 7— Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.7.1 Grade 7H— Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),

1.1.8 Grade 9— Titanium alloy (3.0 % aluminum, 2.5 % vanadium),

1.1.9 Grade 11— Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.10 Grade 12— Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.11 Grade 13— Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.12 Grade 14— Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.13 Grade 15— Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.14 Grade 16— Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.14.1 Grade 16H— Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),

1.1.15 Grade 17— Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.16 Grade 18— Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.17 Grade 19— Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.18 Grade 20— Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,

1.1.19 Grade 21— Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),

1.1.20 Grade 23— Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),

1.1.21 Grade 24— Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,

1.1.22 Grade 25— Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,

1.1.23 Grade 26— Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.23.1 Grade 26H— Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),

1.1.24 Grade 27— Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.25 Grade 28— Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,

1.1.26 Grade 29— Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,

1.1.27 Grade 30— Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.28 Grade 31— Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.29 Grade 32— Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),

1.1.30 Grade 33— Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),

1.1.31 Grade 34— Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.32 Grade 35— Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.33 Grade 36— Titanium alloy (45 % niobium),

1.1.34 Grade 37— Titanium alloy (1.5 % aluminum),

1.1.35 Grade 38— Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron), and

1.1.36 Grade 39— Titanium alloy (0.25 % iron, 0.4 % silicon).

Note 1 — H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use. The H grades were added in response to a user association request based on its study of over 5200 commercial Grade 2, 7, 16, and 26 test reports, where over 99 % met the 58 ksi minimum UTS.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E8 Test Methods for Tension Testing of Metallic Materials

E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E290 Test Methods for Bend Testing of Material for Ductility

E539 Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

E1409 Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

E1447 Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

E1941 Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

E2371 Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

E2626 Guide for Spectrometric Analysis of Reactive and Refractory Metals

Keywords

plate; sheet; strip; titanium; titanium alloys;

ICS Code

ICS Number Code 77.150.50 (Titanium products)

DOI: 10.1520/B0265 ASTM International is a member of CrossRef.

ASTM B265 (Nonferrous Metal Standards and Nonferrous Alloy Standards)

Citing ASTM Standards

[Back to Top]

Additional information

Standard Title	B265-13 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate (Redline)
Published Code	ASTM
Publication Date	2013
Pages Count	10
ICS Codes	77.150.50 - Titanium products

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-B265 2013(Redline)

ASTM B265 (Nonferrous Metal Standards and Nonferrous Alloy Standards)

Related products