Shopping Cart

No products in the cart.

ASTM-A924 2010(Redline)

$30.55

A924/A924M-10a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process (Redline)

Published By Publication Date Number of Pages
ASTM 2010 16
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Abstract

This specification covers the general requirements for steel sheet in coils and cut length, metallic-coated on continuous lines by the hot-dip process. This material is intended for applications requiring corrosion resistance. Hot-dip metallic coatings are available in six different types: zinc and zinc-iron alloy, lead-tin alloy, aluminum, aluminum-zinc alloy, zinc-aluminum alloy, and zinc-aluminum-magnesium alloy. Heat analysis shall be made to determine the percentage of carbon, manganese, phosphorus, sulfur, and other elements specified. Product analysis and coating analysis shall also be done. Mechanical properties shall be determined by tension tests. The following are tests for coating properties: coating weight test and coating bend test. There are two methods that shall be used for coating weight test: weigh-strip-weigh method and X-ray fluorescence method.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the general requirements that, unless otherwise specified in the product specification, apply to steel sheet in coils and cut lengths, metallic-coated on continuous lines by the hot-dip process. The product is intended for applications requiring corrosion resistance. The product specifications contain requirements for specific strength levels, heat resistance, paintability, or formability, or a combination thereof.

1.2 Subject to individual product specification provisions, steel sheet is available as Commercial Steel (CS) Types A, B, and C, Forming Steel (FS), Drawing Steel (DS), Deep Drawing Steel (DDS), Extra Deep Drawing Steel (EDDS), High Temperature Steel (HTS), Structural Steel (SS), and High Strength Low Alloy Steel (HSLAS). Steel sheet is produced with the following metallic coatings. Specific information on each of the following is contained in the individual product specification:

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A90/A90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A308/A308M Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process A309 Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test A370 Test Methods and Definitions for Mechanical Testing of Steel Products A428/A428M Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles A463/A463M Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process A653/A653M Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products A754/A754M Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence A755/A755M Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products A792/A792M Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process A875/A875M Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process A902 Terminology Relating to Metallic Coated Steel Products A929/A929M Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A1030/A1030M Practice for Measuring Flatness Characteristics of Steel Sheet Products A1046/A1046M Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process A1063/A1063M Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications E376 Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

Federal Standard

Fed.Std.No.123 Marking for Shipment (Civil Agencies)

Keywords

aluminum-coated iron/steel; aluminum-zinc alloy-coated steel, 55 %; coating; coatingsaluminum; coatings55 % aluminum-zinc; coatingshot-dip; coatingsmetallic; coatingsterne metal; coatingszinc (hot-dip); coatingszinc-5 % aluminum; coatingszinc-aluminum-magnesium; corrosion; hot-dip; metallic-coated; sheet; steel; steel productshot-dip coatings; steel sheetaluminum-coated; steel sheetterne coated; steel sheetzinc-aluminum-magnesium alloy-coated; steel sheetzinc-coated (galvanized); zinc-aluminum-magnesium alloy-coated steel; zinc-coated iron/steel; Aluminum-coated steel sheet–specifications; Aluminum-zinc alloy-coated steel–specifications; Corrosive service applications–plate/sheet/strip; Hot-dip processed coatings–specifications; Metallic steel sheet–secifications; Terne-coated steel sheet–specifications; Zinc-coated steel sheet–specifications;

ICS Code

ICS Number Code 25.220.40 (Metallic coatings)

DOI: 10.1520/A0924_A0924M-10A ASTM International is a member of CrossRef.

ASTM-A924 2010
$30.55