ASTM-A565 2005
$35.75
A565/A565M-05a Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 4 |
1.1 This specification covers hot-finished and cold-finished martensitic chromium steel bars for high-temperature service. The mechanical properties are developed by suitable heat treatment, as indicated for each alloy.
1.2 Where strength at temperature is a factor, these steels are generally limited to a maximum service temperature of 1200F [650C]. For oxidation (scaling) resistance and at low stresses, these steels are useful to 1450F [790C].
1.3 This specification is expressed in both inch-pound units and SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Ordering Information General Requirements Manufacture |
| 2 | Chemical Requirements Metallurgical Requirements Mechanical Properties Requirements TABLE 1 TABLE 2 |
| 3 | Keywords TABLE 3 TABLE 4 |
Related products
-
ASTM-B565 2015
B565-04(2015) Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire…
-
ASTM-A865 2002
A865-97(2002) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for…
-
ASTM-A505 2000
A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for…
-
ASTM-A555 2005
A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods Published By…
-
ASTM-A595 2002
A595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use Published By Publication Date…
-
ASTM-A565 2009
A565/A565M-05a(2009) Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…
-
ASTM-A563 2007(Redline)
A563-07a Standard Specification for Carbon and Alloy Steel Nuts (Redline) Published By Publication Date Number…
-
ASTM-A565 2003
A565-03 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service…
-
ASTM-A560 2005
A560/A560M-05 Standard Specification for Castings, Chromium-Nickel Alloy Published By Publication Date Number of Pages ASTM…
-
ASTM-A265 2009
A265-09 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate Published By Publication Date Number…
-
ASTM-A265 2003
A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate Published By Publication Date Number…
-
ASTM-A565 2003
A565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…
-
ASTM-A568 2002
A568/A568M-02 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements…
-
ASTM-A505 2005
A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for…
-
ASTM-A564 2004
A564/A564M-04 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes Published By…
-
ASTM-A568 2005
A568/A568M-05a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General…
-
ASTM-A556 2005
A556/A556M-96(2005) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes Published By Publication Date…
-
ASTM-A568 2005
A568/A568M-05 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements…
-
ASTM-A568 2000
A568/A568M-00b Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements…
-
ASTM-A568 2004
A568/A568M-04a Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements…
-
ASTM-A965 2001
A965/A965M-01 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-F565 2003
F565-00(2003) Standard Practice for Care and Handling of Orthopedic Implants and Instruments Published By Publication…
-
ASTM-A965 2005
A965/A965M-05 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-A595 2004
A595-04a Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use Published By Publication Date…
-
ASTM-A965 2002
A965/A965M-02e1 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts Published By…
-
ASTM-A563 2015
A563-15 Standard Specification for Carbon and Alloy Steel Nuts Published By Publication Date Number of…
-
ASTM-A565 2002
A565-02 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service…
-
ASTM-A575 2007
A575-96(2007) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades Published By Publication Date Number…
-
ASTM-A565 2003
A565-03a Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…
-
ASTM-A568 2006
A568/A568M-06a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General…
-
ASTM-A568 2009
A568/A568M-09 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General…
-
ASTM-A555 2002
A555/A555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods Published By…
-
ASTM-A865 2006
A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for…
-
ASTM-A564 2009
A564/A564M-04(2009) Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes Published By…
-
ASTM-A765 2004
A765/A765M-04 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements…
-
ASTM-C565 2005
C565-93(2005) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials Published By…
-
ASTM-A565 2005
A565/A565M-05 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service Published By Publication Date…
-
ASTM-A564 2001
A564/A564M-01 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes Published By…
-
ASTM-D565 2005
D565-99(2005) Standard Test Method for Carbonizable Substances in White Mineral Oil Published By Publication Date…
-
ASTM-A564 2002
A564/A564M-02 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes Published By…
